Ieee 1394A Connector; Front Panel Audio Connector - Asus P8P67-M PRO User Manual

2. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
P8P67-M PRO
P8P67-M PRO Front panel audio connector
• We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard's high-definition audio capability.
• If you want to connect a high-definition front panel audio module to this connector, set
the Front Panel Type item in the BIOS setup to [HD]. If you want to connect an AC'97
front panel audio module to this connector, set the item to [AC97]. By default, this
connector is set to [HD]. See section 2.5.6 Onboard Devices Configuration for details.
3. IEEE 1394a connector (10-1 pin IE1394_1)
This connector is for an IEEE 1394a port. Connect the IEEE 1394a module cable
to this connector, then install the module to a slot opening at the back of the system
chassis.
P8P67-M PRO
P8P67-M PRO
Never connect a USB cable to the IEEE 1394a connector. Doing so will damage the
motherboard!
The IEEE 1394a module is purchased separately.
Chapter 1: Product introduction
SENSE2_RETUR
SENSE1_RETUR
PRESENCE#
GND
HD-audio-compliant
IE1394_1
PIN 1

IEEE 1394a connector

AAFP
PORT2 L
SENSE_SEND
PORT2 R
PORT1 R
PORT1 L AGND
PIN 1
pin definition compliant definition
NC Line out_L
NC
NC Line out_R
NC MICPWR
MIC2
PIN 1
Legacy AC'97
1-27