Removing the DIMM Modules
1. Perform the
"Removing the DIMM
2. Push out the latches on both sides of the DIMM slot (1) until the module tilts upward, then
detach the DIMM module from the slot (2).
Figure 3-6. DIMM Modules
NOTE:
NOTE:
A circuit board that is > 10cm
Figure
3-6. Follow the local regulations for disposing this type of circuit board.
3. Repeat Step 2 to remove the remaining DIMM module.
Machine Maintenance
Cover" procedure described on page 3-10.
2
has been highlighted with a yellow rectangle in
0
3-11