Removing the Mainboard
1. Perform the
"Removing the Palmrest Module/Upper
page 3-18.
2. Perform the
"Removing the ODD
3. Perform the
"Removing the HDD
4. Perform the
"Removing the WLAN
5. Turn the computer over to acces the base side of the lower case assembly.
6. Disconnect the speaker cable from the main board.
Figure 3-32. Speaker Cable
7. Turn the computer over to acces the mainboard.
8. Release the LCD cable from the adhesive tape securing it (1), then disconnect the cable
from the mainboard (2).
Figure 3-33. LCD Cable
3-28
Case" procedure described on
Module" procedure described on page 3-12.
Module" procedure described on page 3-25.
Module" procedure described on page 3-26.
Machine Maintenance
0