Removing Transport Safety Packaging; Electrical Connection - AEG LAVATHERM 58840 User Manual

34 Installation
WARNING!
The appliance must not be installed behind the lockable door, a sliding door or a
door with a hinge on the opposite side to that of the appliance.

Removing transport safety packaging

CAUTION!
Before use all parts of the transport packag-
ing must be removed.
1. Open loading door
2. Pull off adhesive strips from inside ma-
chine on top of drum.
3. Remove foil hose and polystyrene
padding from the machine.

Electrical connection

Details on mains voltage, type of current and the fuses required should be taken
from the rating plate. The rating plate is fitted near the loading aperture (see
"Product description" chapter).
Connect the machine to an earthed socket, in accordance with current wiring
regulations.
WARNING!
The manufacturer declines any responsibility for damage or injury through
failure to comply with the above safety precautions.
Should the appliance power supply cable need to be replaced, this must be
carried out by our Service Centre.