Installation And Connection Instructions; Installation Safety Instructions; Removing Transport Safety Packaging - AEG LAVATHERM 57810 User Information

Installation and connection instructions

1 Installation safety instructions

• Before first starting up, all parts of the transport safety devices must
be removed. The machine may otherwise be damaged.
• Before using for the first time, ensure that the nominal voltage and
type of current specified on the machine rating plate match the
nominal voltage and type of current at the installation site. The elec-
trical fuses required can also be found on the rating plate.
• Always connect the plug into a protection contact socket which has
been installed as specified.
• With permanent connections: A permanent connection may only be
established by an authorised specialist electrician.
• Do not install machine in rooms at risk of frost.
• Ensure that the door of the machine cannot be blocked by interior
doors of the house or the doors of other appliances.
• Do not install on deep pile carpets. Air circulation will be hindered at
the ventilation slots.
• Ensure that the machine is not placed on its mains cable.
• The tumble dryer must be level when installed.
• Any electrical work required to install this appliance should be carried
out by a qualified electrician or competent person.

Removing transport safety packaging

1
Caution! Before use all parts of
the transport packaging must be
removed.
1. Open loading door
2. Pull off adhesive strips from inside
machine on top of drum.
25