Asus P8H61-M PLUS V3 User Manual page 30

6. Intel H61 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1~4)
®
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via
Serial ATA 3.0 Gb/s signal cables.
P8H61-M PLUS V3 SATA 3.0Gb/s connectors
• You must install Windows
• When using hot-plug and NCQ, set the SATA Mode item in the BIOS to [AHCI Mode].
7. USB connectors (10-1 pin USB56, USB78)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
P8H61-M PLUS V3
P8H61-M PLUS V3 USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB module cable is purchased separately.
1-20
P8H61-M PLUS V3
hard disk drives.
See section 2.5.4 SATA Configuration for details.
PIN 1
XP Service Pack 3 or later version before using Serial ATA
®
USB56 USB78
PIN 1
ASUS P8H61-M PLUS V3