Asus P8H61-M PLUS User Manual page 31

8. System panel connector (20-8 pin PANEL)
This connector supports several chassis-mounted functions.
P8H61-M PLUS System panel connector
• System power LED (2-pin PLED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
• Hard disk drive activity LED (2-pin IDE_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The IDE LED lights up or flashes when data is read from or written to
the HDD.
• System warning speaker (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
• ATX power button/soft-off button (2-pin PWRSW)
This 2-pin connector is for the system power button.
• Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
Chapter 1: Product introduction
E6335_P8H61-M PLUS.indb 21
PANEL
PIN 1
P8H61-M PLUS
IDE_LED
* Requires an ATX power supply
PLED SPEAKER
PWRSW RESET
1-21
4/11/11 5:03:57 PM