Download  Print this page

Sony DMX-NV1 Attachment Manual

Sony dmx-nv1 attachment guide for kdl40wl140/kdl46wl140/kdl52wl140 tv models.
Hide thumbs
   

Advertisement

Required Items for Assembly
Your Sony TV with XMB
Bracket (1)/ Plastic Fastener (2)/ Mounting Knob (2)/ Phillips Screwdriver (for removal only; not supplied)
To Begin
On the back of the TV, locate the attachment holes situated on the right side, above the rear input panel.
These instructions are shown without cables attached. We recommend that you familiarize yourself with the attachment
process, then review the BRAVIA Internet Video Link's Quick Setup Guide (supplied) for information on connecting
the cables.
1
Align the holes on the bracket (supplied) to the holes
on the back of your TV.
© Sony Corporation 2008
Attachment Guide
For TV Models: KDL-40WL140/KDL-46WL140/KDL-52WL140
(1) / BRAVIA
Internet Video Link (DMX-NV1) (1)/ Cable Cover (1)/ Mounting
®
Plastic Fasteners
Printed in U.S.A.
2
Insert the 2 Plastic Fasteners (supplied) into the holes,
then press in the head of the fasteners using your
finger until they click.
~
Do not push in the head of the fastener until you have
inserted the fastener into the bracket and the hole on the
TV. Do not use a screwdriver to tighten the screws.
DMX-NV1
4-116-032-11(1)

Advertisement

Table of Contents

   Related Manuals for Sony DMX-NV1

   Summary of Contents for Sony DMX-NV1

  • Page 1 DMX-NV1 Attachment Guide For TV Models: KDL-40WL140/KDL-46WL140/KDL-52WL140 Required Items for Assembly Your Sony TV with XMB (1) / BRAVIA Internet Video Link (DMX-NV1) (1)/ Cable Cover (1)/ Mounting ® ™ Bracket (1)/ Plastic Fastener (2)/ Mounting Knob (2)/ Phillips Screwdriver (for removal only; not supplied) To Begin On the back of the TV, locate the attachment holes situated on the right side, above the rear input panel.
  • Page 2 Insert the Mounting Knobs into the threaded holes Place the bottom Mounting Knob into the hole on the and lightly twist by hand. Do not fully tighten the bracket, leaving the top Mounting Knob sitting above Mounting Knobs. the top hole. Cables thread out on this side To Remove the Mounting Bracket Push down the receiver so both Mounting Knobs...

This manual is also suitable for:

Kdl-40wl140Kdl-46wl140Kdl-52wl140

Comments to this Manuals

Symbols: 0
Latest comments: