Table of Contents
Advertisement
1 HARDWARE
1.1 Front Panel Display
LED
Status
POWER
On
2.4G / 5G On
Off
Flashing
WAN
On
Off
Flashing
LNK/ACT On
(1-4)
Off
Flashing
1000M
On
Off
1.2 Back Panel Display
Radio
ON/OFF
Reset/WPS
Feature Description
Antennas All antennas are fixed-dipole with 3 dBi of gain each.
Radio
Activate or deactivate the wireless functions with this ON/OFF switch.
Reset/
Reset the router to factory default settings (clear all settings) or start the
WPS
WPS function. Press and hold for 10 seconds to restore all settings to
factory defaults; press once for less than 5 seconds to start the 2.4GHz
WPS function; press twice for less than 5 seconds to start the 5GHz WPS.
1-4
Local Area Network (LAN) ports 1 to 4.
WAN
Wide Area Network (WAN/Internet) port.
5 / 12 VDC Connects the A/C power adapter (Model 525268 = 5V DC; 524988 = 12V DC ).
Description
Router is switched on and correctly powered.
Indicates that the particular WLAN mode is active.
The WLAN mode is not active.
Wireless data is being received and/or transmitted.
The WAN port is connected to a cable or DSL modem.
No device is connected to the WAN port.
Data traffic on WAN port.
A device is connected to the LAN port.
No device is connected to the LAN port.
Data traffic on LAN port.
A device is connected at Gigabit speed
A device is connected at either 10 or 100 Mbps.
4
3
2
1
WAN
Shown: Model 524988
Shown: Model 525268
5VDC
5
HARDWARE
Advertisement
Table of Contents
