Programming Auto Off Timer Feature; Cleaning External Parts; Cleaning And Maintenance - Keurig B70 Owner's Manual

SECTION 2
Controls & Indicators

Programming auto Off Timer Feature

Set the Brewer to turn off two hours after the last brew.
Press the Power Button to turn on the Brewer.
1.
7
fig.
2. Press the black Button to the right of the
'AUTO OFF' text on the LED Control Center
to turn on the Auto Off Timer feature (fig. 7)
ADD WATER
The green light next to 'AUTO OFF' will
DE-SCALE
become illuminated. When the Auto Off Timer
HEATING
is enabled, your Brewer will automatically
AUTO OFF
turn off two hours after your last brew.
POWER
To turn off the Auto Off Timer, simply press the
3.
black Button again and the green light next to
'AUTO OFF' will turn off.
(LED Control Center)
SECTION 3
Cleaning & Maintenance

cleaning External Parts

Regular cleaning of the Brewer's external components is recommended.
Never immerse the Brewer in water or other liquids. The Housing and other
1.
external components may be cleaned with a soapy, damp, non-abrasive cloth.
The Drip tray can accumulate up to 8 ounces of overflow. The Drip Tray
2.
and Drip Tray Plate should be periodically inspected and rinsed clean. To
remove the Drip Tray Assembly, simply slide it toward you, keeping it level
at all times to avoid spilling. The Drip Tray and Drip Tray Plate are
dishwasher safe.
cleaning the K-cup holder assembly
1. Cleaning the Parts —
8
fig.
10
The K-Cup
®
Assembly can be placed onto the top shelf of a
dishwasher.
NOTE: Use low temperature cycles in
To remove from the Brewer,
the dishwasher.
open the cover by lifting the Handle. Grasp the
top of the K-Cup Holder with one hand while
pushing up on the bottom of the K-Cup Holder
from underneath with the other until it releases
(fig. 8). After cleaning, align the K-Cup Holder
with the opening using the two front ribs as a
guide and snap into place from the top.
Holder