HP StorageWorks 2/16 - SAN Switch Quick Reference Manual page 4

perfCfgClear Clear the previously saved
performance monitoring
configuration settings from
non-volatile memory
perfCfgRestore Restore performance monitoring
configuration settings from
non-volatile memory
perfCfgSave Save performance monitoring
configuration settings to non-volatile
memory.
perfClrAlpaCrc Clear an AL_PA device's CRC count
by the port and AL_PA.
perfDelEEMonitor Delete an end-to-end monitor on
port.
perfDelFilterMonitor Delete a filter-based monitor.
perfHelp Display performance monitoring help
information.
perfSetPortEEMask Set overall mask for end-to-end (EE)
monitors.
perfShowAlpaCrc Display the AL_PA CRC count by port
or by AL_PA.
perfShowEEMonitor Display end-to-end monitor
information and frame traffic on a
port.
perfShowFilterMonitor Display filter-based monitor
information and frame traffic for a
port.
perfShowPortEEMask Display the current end-to-end mask
of a port.
portCfgEport Enable or disable a port from
becoming an E_Port.
portCfgGport Designate a port as a locked G_Port.
portCfgLongDistance Configure a port to support long
distance links.
portCfgLport Lock a port as an L_PORT.
portCfgMcastLoopback Configure a port to receive multicast
frames.
portCfgShow Display port configuration settings.
portCfgSpeed Configure the port speed level.
portCfgTrunkport Configure a port to be enabled or
disabled for trunking.
portDisable Disable a switch port.
portEnable Enable a switch port.
portErrShow Display port error summary.
portLEDTest Exercise the user port LEDs.
portLogClear Clear the port log.
portLogDump Display the port log without page
breaks.
portLogDumpPort Display the port log of specified port,
without page breaks.
portLogShow Display the port log.
portLoopbackTest Functional test of port N->N path.
Legend: V3.0.x unique commands
V4.0.x unique commands
V3.0.x and V4.0.x commands
portPerfShow
portRegTest
portRouteShow
portShow
portStatsShow
powerOffListSet
powerOffListShow
psShow
ptdatashow
ptphantomshow
ptpropshow
ptregshow
ptrouteshow
ptstatsshow
qlDisable
qlEnable
qloopAdd
qloopCreate
qloopDelete
qloopRemove
qloopShow
qlPartner
qlPortDisable
qlPortEnable
qlPortShowAll
qlShow
qlStatsShow
quietMode
ramTest
reboot
routeHelp
savecore
sensorShow
setesdmode
setgbicmode
setmfgmode
setsfpmode
setSlot
setSplbMode
Legend: V3.0.x unique commands
V4.0.x unique commands
V3.0.x and V4.0.x commands
Page 4
Display port throughput performance
in bytes, kilobytes, or megabytes.
Bit write/read test of the ASIC SRAMs
and registers.
Display routing tables for a port.
Display port status.
Display port hardware statistics.
Sets slot power off list order.
Displays slot power off list order.
Display power supply status.
Display port data structure.
Display port routing tables.
Display port properties.
Display ASIC port registers.
Display port routing properties.
Display port statistics properties.
Disable QuickLoop mode.
Enable QuickLoop mode.
Add a member to a QuickLoop.
Create a QuickLoop.
Delete a QuickLoop.
Remove a member from a QuickLoop.
Display QuickLoop information.
Set a QuickLoop partner or display
information about a partner.
Disable a QuickLoop port.
Enable a QuickLoop port.
Display QuickLoop port information.
Display QuickLoop information.
Display QuickLoop statistics.
Toggle the shell quiet mode on and
off.
Bit write and read test of SDRAMs in
the switch.
Reboot the switch.
Display routing help commands.
Save or remove core files created by
daemons.
Display sensor readings.
Enable or disable ESD mode.
Enable or disable GBIC mode.
Enable or disable Mfg mode.
Enable or disable SFP mode.
Set the default slot number for
diagnostic commands.
Enable or disable two port loopback.