HP StorageWorks 2/16 - SAN Switch Quick Reference Manual page 3

haDisable Disable the High Availability feature
in the switch.
haEnable Enable the High Availability feature
in the switch.
haFailover Forces the failover mechanism so that
the Standby CP becomes the Active
CP.
haShow Display control processor (CP) status.
help Display help information for
commands.
historyLastShow Display last history log record.
historyShow Display the history log.
i Display task summary.
ifModeSet Set the link operating mode for a
network interface.
ifModeShow Display the link operating mode for a
network interface.
ifShow Display network interface
information.
interfaceShow Display FSPF interface information.
iodReset Turn off the In-order Delivery (IOD)
option.
iodSet Enable the In-Order Delivery (IOD)
option.
iodShow Display the In-Order Delivery (IOD)
option setting.
ipAddrSet Set the IP Address details for a switch
or Control Processor.
ipAddrShow Display the IP address for a switch or
Control Processor.
licenseAdd Add license key to switch.
licenseHelp Commands used to administer license
keys.
licenseIdShow Display system license ID.
licenseRemove Remove the license key from a switch.
licenseShow Display current license keys.
linkCost Set or print the FSPF cost of a link.
login Login as a new user.
logout Logout from a shell session.
loopdiagClear Clear information from management
layers.
loopdiagDone Completes loopdiag application.
loopdiagRestore Restore the original loop
configuration.
loopdiagStart Start loopdiag application.
loopdiagStop Stops the loopdiag application.
loopPortTest Tests the L-port path on a loop.
LSDbShow Display the FSPF Link State Database.
lutil License administration utility.
mcastShow Display multicast routing information.
Legend: V3.0.x unique commands
V4.0.x unique commands
V3.0.x and V4.0.x commands
memshow
minispropshow
minisregshow
msCapabilityShow
msConfigure
msPlatShow
msPlCapabilityShow
msPlClearDB
msPlMgmtActivate
msPlMgmtDeactivate
msTdDisable
msTdEnable
msTDReadConfig
myid
nbrStatsClear
nbrStateShow
nsAllShow
nsShow
parityCheck
passwd
perfAddEEMonitor
perfAddIPMonitor
perfAddReadMonitor
perfAddRWMonitor
perfAddSCSIMonitor
perfAddUserMonitor
perfAddWriteMonitor
Legend: V3.0.x unique commands
V4.0.x unique commands
V3.0.x and V4.0.x commands
Page 3
Display the amount of free and used
memory in switch.
Display the properties of the
mini-switches.
Display port registers for a specified
mini-switch.
Display the Management Server
Capability.
Configure the Management Server.
Display the Management Server
Platform database.
Display the Platform Database
Management Capability.
Clear the Management Server
Platform database on all switches in
the fabric.
Activate the Management Server
Platform service on all switches in the
fabric.
Deactivate the Management Server
Platform service on all switches in the
fabric.
Disable the Management Server
Topology Discovery service.
Enable the Management Server
Topology Discovery service.
Display the status of Management
Server Topology Discovery service.
Display the current login session
details.
Reset FSPF interface counters.
Display FSPF neighbor's state.
Display global Name Server
information.
Display local Name Server
information.
Enable or disable DRAM parity
checking.
Change system login name and
password.
Add end-to-end monitor to a port.
Add a filter-based monitor for IP
frame count.
Add a filter-based monitor for the
SCSI Read command.
Add a monitor for the SCSI Read and
Write commands.
Add a monitor for SCSI frame count.
Add a user-defined filter-based
monitor.
Add a filter-based monitor for the
SCSI Write command.