Product Features; Connectivity Features - McDATA StorageWorks 2/140 - Director Switch Planning Manual

Introduction to McDATA Multi-Protocol Products
1

Product Features

Connectivity
Features
McDATA Products in a SAN Environment - Planning Manual
1-28
In addition to the characteristics and performance features described
in this chapter, McDATA managed products also provide a variety of:

• Connectivity features.

• Security features.
• Serviceability features.
McDATA directors, fabric switches, SAN routers, and their associated
Element Manager applications support the following connectivity
features. Products or product classes that do not support a
connectivity feature are noted.
• Any-to-any connectivity - Subject to user-defined restrictions
such as zoning, directors, fabric switches, and FCP ports on SAN
routers define the destination port with which a source port is
allowed to communicate and provide any-to-any port
connectivity. In addition, most directors and fabric switches
provide connectivity for both FCP and FICON devices.
NOTE: SAN routers do not support FICON connectivity.
• Port blocking - System administrators can block or unblock any
director or fabric switch port through the associated Element
Manager application. Blocking a port prevents an attached device
from logging in to the director or switch or communicating with
any attached device. A blocked port continuously transmits a
Fibre Channel offline sequence (OLS).
NOTE: SAN routers do not support port blocking.
• Zoning - System administrators can partition attached devices
into restricted-access groups called zones. Devices in the same
zone can recognize and communicate with each other through
port-to-port connections. Devices in separate zones cannot
recognize and communicate with each other. Directors, fabric
switches, and SAN routers support port number and world-wide
name (WWN) zoning.