Figure 36 Many-to-One Example using Mixed WAN Link Speeds
.
Here are four remote sites replicating 100 GB and 500 GB backups daily into a central D2D4000.
Note also that the central D2D4000 has 2 x 1 GbE connections from the central router for link
aggregation.
Follow these guidelines for the best approach to a many-to-one scenario:
•
Size each of the individual links separately.
•
If possible use the "blackout window" settings to stagger the replications throughout the day to
ensure there are not greater than eight replications active at any one time.
•
Be careful with bandwidth limiting values. There is a minimum of 512 KB/sec and the throttling
value selected should not cause impaired application response times.
•
If possible, provision some extra bandwidth above what is required for daily replication to allow
for "catch-up" mode if replications are paused/stopped due to a link failure.
•
Wherever possible do a proof of concept before implementing into production.
88
D2D Systems
Need help?
Do you have a question about the StorageWorks 12000 - Virtual Library System EVA Gateway and is the answer not in the manual?