Power On Command; Power Off Command Ÿ Quick Power Offÿ; Power Off Command; Computer 1 Command - Sanyo PLC-XU300A - 3000 Lumens Manual

PLC-XU300/350 Basic Serial Command Specifications

6.5. POWER ON Command

Command "C00" [CR]
Power ON
When already Power is ON, nothing is done.
Detail
When sending this command during processing Countdown, Countdown is
terminated.
Acceptable
Response
Unacceptable
6.6. POWER OFF Command ÿ Quick Power OFFÿ
Command "C01" [CR]
Power OFF (Standby)
When Power is OFF with ON/STAND-BY button of the projector and remote
Detail
control, "Power OFF?" is displayed. However, as soon as this command is sent,
Quick Power OFF is executed.
Acceptable
Response
Unacceptable

6.7. POWER OFF Command

Command "C02" [CR]
Power OFF (Standby).
The command operates the same Power OFF function as ON/STAND-BY button
of the projector and remote control.
Detail
Once this command is sent, "Power OFF?" is displayed. If this command is sent
again while it is displayed, Power OFF is executed.
When sending this command during Countdown, Countdown is terminated.
Acceptable
Response
Unacceptable

6.8. Computer 1 Command

Command "C05" [CR]
Select Computer 1 Input
Detail Although projector returns "OK", Input search is not executed with this command
while Input search is set to On1 or On2,
Acceptable
Response
Unacceptable

6.9. Computer 2 Command

Command "C06" [CR]
Select Computer2 Input
Note 1) Although projector returns "OK", Input search is not executed with this
command while Input search is set to On1 or On2,
Detail
Note 2)
Monitor out is selected in Terminal menu,
Acceptable
Response
Unacceptable
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
Although projector returns "OK", this command is not executed while
[ACK] [CR]
"ÿ "[CR]
10/23