Table of Contents
Advertisement
The steps involved in using the menus are typically as follows:
1.
Ensure that the display panel indicates that the printer is
ready to print.
2.
Enter User menu mode by pressing either the Enter button
or the Up-arrow or Down-arrow button and press the
latter two repeatedly until the desired menu is highlighted in
the displayed list.
3.
Press the Enter button to select this menu.
4.
Press the Up-arrow or Down-arrow buttons repeatedly
until the desired Item is highlighted.
5.
Press the Enter button to select this Item.
6.
Press the Up-arrow or Down-arrow buttons repeatedly
until the desired Value is highlighted.
7.
Press the Enter button to select this Value. (If you are
setting a parameter, ensure that an asterisk (*) appears
beside the selected parameter Value.)
8.
Press the Online button to exit menu mode and return to the
ready to print status.
Refer to the section entitled
system"
for examples of using the menus.
"Getting started"
pro910 User's Guide> 40
and
"Appendix B – Menu
Advertisement
Table of Contents
