ZyXEL Communications NSA-220 Plus User Manual page 214

Chapter 8 Package Management
Click Protect > Backup to open the following screen.
Figure 90 Protect > Backup
The following table describes the labels in this screen.
Table 65 Protect > Backup
LABEL
Backup
Add Job
Edit Job
Delete Selected
Job(s)
Execute Job Now
Restore Archive
Abort Job
Status
Job Name
Job Description
Backup Info
Scheduler Info
214
DESCRIPTION
Click this to create and customize a backup job.
Select a backup job in the list and click this to make some changes to
it.
Select a backup job in the list and click this to delete it.
Select a backup job in the list and click this to run the backup job
immediately.
Select a backup job in the list and click this to restore the file(s)
included in that backup job to the NSA.
This applies to Archive backups only. Refer to
226 to see the screens.
Select a backup job in the list and click this to stop the process if the
backup job is currently active.
This shows the current state of the backup job.
• Waiting means the backup job is not active but is scheduled to
run at some time.
• Running indicates that the NSA is currently doing the backup job.
When the backup job is running, you can also see a progress bar.
This identifies the backup job.
This is a short description of the backup job.
This lists down the backup job details: type, source and target. Refer
to Section 8.10.1 on page 215
This shows the backup schedule, including the frequency, the time it
was last run in (and whether or not it succeeded), and when it is
scheduled to run again. The times use yyyy-mm-dd hh:mm:ss
format.
Refer to Section 8.10.4 on page
Section 8.10.8 on page
and Section 8.10.2 on page
221.
NSA-220 Plus User's Guide
217.