ZyXEL Communications NSA-220 Plus User Manual page 206

Chapter 8 Package Management
Click Network > NFS to open the following screen.
Figure 83 Network > NFS
The following table describes the labels in this screen.
Table 59 Network > NFS
LABEL
NFS Service
Enable NFS
Server
Disable NFS
Server
Add NFS Share
NFS Session
Edit NFS Share
Delete NFS Share
(s)
The table lists your NFS shares. Click a column's heading to sort the entries by that
criteria.
Status
NFS Share Path
Volume Name
DN/IP Filter
Comment
206
DESCRIPTION
Click this to employ NFS in your NSA.
Click this to stop using NFS.
This makes all NFS shares unavailable.
Click this to add an NFS share.
Refer to Section 8.7.1 on page 207
Click this to view active NFS sessions. You can see the list of users
who have access to the NFS shares.
Refer to Section 8.7.2 on page 208
Select an NFS share from the list and click this to edit it.
Refer to Section 8.7.1 on page 207
Select an NFS share from the list and click this to delete it.
This shows whether the share is active or not.
This shows the location of the share in the NSA.
This shows the volume where the NFS share is located.
This shows which domain name(s) or IP address(es) have read/write
access to the NFS shares.
Refer to Section 8.7.1 on page 207
configure this.
This shows a short description of the share.
for the Add NFS Share screen.
for the NFS Session screen.
for the Edit NFS Share screen.
for the screen where you can
NSA-220 Plus User's Guide