Asus P8H61-M LX2 R2.0 User Manual page 33

4. CPU and chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
P8H61-M LX2 R2.0
P8H61-M LX2 R2.0 CPU connectors
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the
system may damage the motherboard components. These are not jumpers! Do not place
jumper caps on the fan connectors!
The CPU_FAN connector supports a CPU fan of maximum 2A (24 W) fan power.
5. USB connectors (10-1 pin USB78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
P8H61-M LX2 R2.0
P8H61-M LX2 R2.0 USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
The USB module cable is purchased separately.
Chapter 1: Product introduction
CPU_FAN
CHA_FAN
GND
+12V
Rotation
USB910 USB78
PIN 1 PIN 1
1-23