Asus P8H61 PLUS User Manual page 38

6. Intel H61 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1~4)
®
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via
Serial ATA 3.0 Gb/s signal cables.
P8H61 Series SATA connectors
• You must install Windows
• When using hot-plug and NCQ, set the SATA Mode item in the BIOS to [AHCI Mode].
7. USB connectors (10-1 pin USB56, USB78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
P8H61 Series USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
The USB module cable is purchased separately.
1-26
P8H61 Series
hard disk drives.
See section 2.5.4 SATA Configuration for details.
P8H61 Series
SATA3G_4 SATA3G_3
SATA3G_2 SATA3G_1
XP Service Pack 3 or later version before using Serial ATA
®
USB56 USB78
PIN 1 PIN 1
USB910
PIN 1
ASUS P8H61 Series