Power Menu; Suspend Mode; Repost Video On S3 Resume; Acpi 2.0 Support - Asus P7P55D-E - Premium Motherboard - ATX User Manual

3.7

Power menu

The Power menu items allow you to change the settings for the Advanced Power
Management (APM). Select an item then press <Enter> to display the configuration options.
Main Ai Tweaker

Suspend Mode

Repost Video on S3 Resume

ACPI 2.0 Support

ACPI APIC Support

EuP Ready

APM Configuration
Hardware Monitor
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
3.7.1 Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used
for system suspend.
[S1 (POS) only] Sets the APCI suspend mode to S1/POS (Power On Suspend).
[S3 only] Sets the APCI suspend mode to S3/STR (Suspend To RAM).
[Auto] The system automatically configures the ACPI suspend mode.
3.7.2 Repost Video on S3 Resume [No]
Determines whether to invoke VGA BIOS POST on S3/STR resume.
[No] The system will not invoke VGA BIOS POST on S3/STR resume.
[Yes] The system invokes VGA BIOS POST on S3/STR resume.
3.7.3 ACPI 2.0 Support [Disabled]
[Disabled] When set to [Disabled], the system will not add additional tables as per
ACPI 2.0 specifications.
[Enabled] When set to [Enabled], the system adds additional tables as per ACPI 2.0
specifications.
3.7.4 ACPI APIC Support [Enabled]
[Disabled] When set to [Disabled], the system disable the Advanced Configuration and
Power Interface (ACPI) support in the Advanced Programmable Interrupt
Controller (APIC).
[Enabled] When set to [Enabled], the ACPI APIC table pointer is included in the RSDT
pointer list.
3.7.5 EuP Ready [Disabled]
[Disabled] Disables the Energy Using Products (EuP) Ready function.
[Enabled] Allows the BIOS to switch off power for WOL, WO_USB, audio, and
onboard LEDs at S5 state to get the system ready for the EuP requirement.
ASUS P7P55D-E
BIOS SETUP UTILITY
Advanced Power
[Auto]
[No]
[Disabled]
[Enabled]
[Disabled]
Boot Tools Exit
Select the ACPI state
used for System
Suspend.
Select Screen
←→
Select Item
↑↓
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
3-29