Power Saver (Pc1 Mode Only) - Samsung PPM42M7HB - 42" Plasma Panel Owner's Instructions Manual

BN68-01304A-00Eng 5/31/07

Power Saver (PC1 mode only)

This PDP Display has a built-in power management system called Power Saver. This power
management system saves energy by switching your PDP Display into a low-power mode when it has
not been used for a certain amount of time. You use a software utility installed on your computer to set
up this feature. See the table below for details.
State
Horizontal Sync
Active
Vertical Sync
Active
Video
Active
Power Indicator
Green On
◆ If the horizontal sync is inactive and the vertical sync active, this PDP Display goes to the screen mute state.
◆ This PDP Display automatically returns to normal operation when horizontal and vertical sync return.
◆ This occurs when moving the computer's mouse or pressing a key on the keyboard.
◆ For energy conservation, turn your PDP Display OFF when it is not needed, or when leaving it unattended for
long periods.
3:52 PM Page 45
Normal
Operation Suspend Mode
Position A1
Active
Inactive
Blanked
Green Blinking
(3 sec Interval)
Power-saving Function Mode
Power-off Mode
Position A2
Inactive
Inactive
Blanked
Green Blinking
(3 sec Interval)
English - 45