Power Saver (Pc1 Mode Only) - Samsung PPM42M6HS Owner's Instructions Manual

Power Saver (PC1 mode only)

This PDP Display has a built-in power management system called Power Saver. This power
management system saves energy by switching your PDP Display into a low-power mode when it has
not been used for a certain amount of time. You use a software utility installed on your computer to set
up this feature. See the table below for details.
State
Operation
Horizontal Sync
Active
Vertical Sync Active
Video
Active
Power Indicator
Green On
◆ If the horizontal sync is inactive and the vertical sync active, this PDP Display goes to the screen mute state.
◆ This PDP Display automatically returns to normal operation when horizontal and vertical sync return.
◆ This occurs when moving the computer's mouse or pressing a key on the keyboard.
◆ For energy conservation, turn your PDP Display OFF when it is not needed, or when leaving it unattended for
long periods.
Normal
Suspend Mode
Position A1
Active
Inactive
Blanked
Green Blinking
(3 sec Interval)
Power-saving Function Mode
Power-off Mode
Position A2
Inactive
Inactive
Blanked
Green Blinking
(3 sec Interval)
English - 45