Switching The Pdp Display On And Off Automatically - Samsung PPM42M7HB - 42" Plasma Panel Owner's Instructions Manual

BN68-01304A-00Eng 5/31/07
Time
Language
PC
Move
Clock Set
On Timer
Off Timer
Move
Hour
12
Source
Component
Volume
10
Move
Hour
12
Source
Component
Volume
10
Move
English - 34
3:52 PM Page 34

Switching the PDP Display On and Off Automatically

You can set the on or off timers so that the PDP Display will:
Setup
: English
1
Enter Return
2
Time
12: 00
12: 00 Off
12: 00 Off 3
4
Enter Return
5
On Timer
Minute
00
6
Activation
No
Adjust Return
7
On Timer
8
Minute
00
9
Activation
Yes
Adjust Return
◆ Switch on automatically and tune source of your choice
at the time you select.
◆ Switch off automatically at the time you select.
➢
The first step is to set the PDP Display's clock (refer to
"Setting and Displaying the Current Time" on page 33).
Press the MENU ( ) button.
Result: The main menu is displayed.
Press the ... or † button to select Setup.
Result: The Setup menu is displayed.
Press the ENTER ( ) button.
Press the ... or † button to select Time.
Press the ENTER ( ) button.
Result: The Time menu is displayed.
Press the ... or † button to select On Timer.
Press the ENTER ( ) button.
Result: The On Timer menu is displayed.
Select Hour, Minute, Source (AV, S-Video, Component, PC1, PC2, or
DVI), or Volume by pressing the œ or √ button.
Set these by pressing the ... or † button.
➢
You can set the hour and minute directly by pressing
the numeric buttons on the remote control.
Press the œ or √ button to select Activation.
To activate On Timer with the setting entered, select Yes by
pressing the ... or † button.
Press the ENTER ( ) button.
Result: The Time menu is displayed again.
Continued...