Security - Asus P6T7 WS SuperComputer - Motherboard - SSI CEB User Manual

Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST) while
booting to decrease the time needed to boot the system. When set to [Disabled],
BIOS performs all the POST items. Configuration options: [Disabled] [Enabled]
Full Screen Logo [Enabled]
This allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Set this item to [Enabled] to use the ASUS MyLogo 2 feature.
AddOn ROM Display Mode [Force BIOS]
Sets the display mode for option ROM.
Configuration options: [Force BIOS] [Keep Current]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
Wait for 'F1' If Error [Enabled]
When set to [Enabled], the system waits for the <F1> key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
Hit 'DEL' Message Display [Enabled]
When set to [Enabled], the system displays the message "Press DEL to run Setup"
during POST. Configuration options: [Disabled] [Enabled]
3.7.3

Security

The Security menu items allow you to change the system security settings. Select
an item then press <Enter> to display the configuration options.
Security Settings
Supervisor Password
User Password
Change Supervisor Password
Change User Password
ASUS P6T7 WS SuperComputer
BIOS SETUP UTILITY
: Not Installed
: Not Installed
Boot
<Enter> to change
password.
<Enter> again to
disable password.
3-33