Creating A Raid 0 Or Raid 1 Set - Asus P6T7 WS SuperComputer - Motherboard - SSI CEB User Manual

Creating a RAID 0 or RAID 1 set

To create a RAID set:
From the utility menu bar, select RAID > Create array.
1.
Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd.
[Selection]
ENTER/SPACE:Select, ESC:Back/Exit
2. Press <Enter>. The screen shows the disks you can add to make up the
RAID set. Use the arrow key to select a disk and press <Enter> or <Space>
to include this disk in the array.
Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd.
[Selection]
Select free disks to create
ID Port Disk Name
0 0
1 1
NEXT
ENTER/SPACE:Select, ESC:Back/Exit
After you have selected the desired disks, select NEXT to create array.
3.
4-52
[Controller] [ Devices ]
[Controller] [ Devices ]
SAS : ST336754SS
SAS : ST336754SS
[ RAID ]
RAID Config
Create array
Delete array
Spare Management
[ RAID ]
RAID Config
Size Max Speed Status
36.6GB SAS 3.0 FREE
36.6GB SAS 3.0 FREE
Chapter 4: Software support