Bluetooth/WLAN Settings (cont.)
OFF OFF OFF ON
OFF ON
OFF ON
OFF ON
ON
Some hosts monitor the Request-To-Send (RTS) signal (pin 4 of
25) to determine if the printer is ready to receive data. Since the
printer does not generate this signal, the RTS pin must be
connected to the Clear-To-Send (CTS) pin (pin 5 of 25)
ON
Bluetooth/WLAN Enable CRC Check
With the printer turned off:
• Open the cover.
• Press and hold the PRINT button.
• Press the POWER button to turn the printer on.
Bluetooth/WLAN Disable CRC Check
With the printer turned off:
• Open the cover.
• Press and hold the FEED button.
• Press the POWER button to turn the printer on.
Bluetooth/WLAN Activate Head Check
With the printer turned off:
• Open the cover.
• Press and hold the PRINT button.
• Press the POWER button to turn the printer on.
Bluetooth/WLAN Deactivate Head Check
With the printer turned off:
• Open the cover.
• Press and hold the FEED button.
• Press the POWER button to turn the printer on.
OFF Bluetooth/WLAN Factory Clear + Clear Head
Counter
With the printer turned off:
• Open the cover.
• Press and hold the PRINT and FEED buttons.
• Press the POWER button to turn the printer on.
OFF
58