Pcipnp - Asus P5SD2-X - Motherboard - ATX Installation Manual

Motherboard installation guide
Hide thumbs Also See for P5SD2-X - Motherboard - ATX:
Table of Contents

Advertisement

Spread Spectrum [+/-0.2%]
Configuration options: [Disabled] [+/-0.1%] [+/-0.2%]...[+/-1.0%]
Top Performance [Disabled]
Configuration options: [Disabled] [Enabled]
Primary Display Adapter [PCI-E]
Allows you to select which graphics controller to use as the primary boot device.
Configuration options: [PCI] [PCI-E]
2.4.3

PCIPnP

Advanced
Plug & Play O/S
Resources Controlled By
x IRQ Resources
Assign IRQ For VGA
** PCI Express relative itmes **
Maximum Payload Size
Plug & Play O/S [No]
When set to [No], the BIOS configures all the devices in the system. When set to
[Yes] and if you install a Plug and Play operating system, the operating system
configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
Resources Controlled By [Auto]
When set to [Auto], the BIOS automatically configures all the boot and Plug and
Play compatible devices. Set to [Manual] if you want to assign the IRQ DMA and
memory base address fields.
Configuration options: [Auto] [Manual]
When the item Resources Controlled By is set to [Auto], the item IRQ
Resources is grayed out and not user-configurable. Refer to the section "IRQ
Resources" for information on how to enable this item.
ASUS P5VD2-X
Phoenix-Award BIOS CMOS Setup Utility
PCIPnP
[No]
[Auto]
[Enabled]
[4096]
Select Menu
Item Specific Help
Select Yes if you are using
a Plug and Play capable
operating system Select
No if you need the BIOS to
configure non-boot devices
2-23

Advertisement

Table of Contents
loading

Table of Contents