Chipset - Asus P5QL-E - Motherboard - ATX User Manual

4.5.2

Chipset

The Chipset menu allows you to change the advanced chipset settings. Select an
item then press <Enter> to display the sub-menu.
Advanced
Advanced Chipset Settings
WARMING: Setting wrong values in below sections
may cause system to malfunction.
North Bridge Configuration
North Bridge Configuration
Advanced
North Bridge Chipset Configuration
Memory Remap Feature
PCI MMIO Allocation: 4GB To 3328MB
Memory Hole
Initiate Graphic Adapter
Memory Remap Feature [Enabled]
Allows you to enable or disable the remapping of the overlapped PCI memory
above the total physical memory. Enable this option only when you install 64-
bit operating system. Configuration options: [Disabled] [Enabled]
Memory Hole [Disabled]
Allows you to set the memory hole mode. Configuration options: [Disabled]
[15MB-16MB]
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot
device. Configuration options: [PCI/PEG] [PEG/PCI]
4-26
BIOS SETUP UTILITY
BIOS SETUP UTILITY
[Enabled]
[Disabled]
[PEG/PCI]
Configure North Bridge
features.
Enabled: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory.
Chapter 4: BIOS setup