To access the cameras using the HTTPS protocol, enter as follows:
Example of entry: https://192.168.0.10/
•
Available number of characters: 1 - 128 characters
•
Default: (camera 1-16) not registered
selfcamera, (camera 2-16) not registered
IMPORTANT
•
When accessing the camera using the HTTPS protocol, install the security certificate of the camera to
display images on the monitor. (®page 181)
SW175
SW175
SW174W
SW174W
•
This camera is specified when "selfcamera" is displayed for the IP address or host name.
Note
•
When using the host name, it is necessary to configure the DNS settings of the PC to be used for the
multi-screen display. Refer to the network administrator for information on the DNS setting of PCs.
[Camera title]
Enter the title of the camera. The entered camera title will be displayed on a multi-screen.
•
Available number of characters: 0 - 20 characters
•
Unavailable characters: " &
Note
•
When selecting a 16 split-screen, some characters of the camera title to be displayed may not be
displayed.
•
Even when "16:9" is selected for "Aspect ratio", the multi-screen is displayed in 4:3.
SW396
SW396
SW172
SW172
ST165
ST165
ST162
ST162
12 Configure the multi-screen settings [Multi-screen]
SW395
SW395
SC386
SC386
SW175
SW175
SW174W
SW174W
SW172
SW172
:
/(camera 1)
SC385
SC385
SC384
SC384
ST165
ST165
ST162
ST162
Operating Instructions
133