Install Drivers - ATTO Technology FastFrame NS12 Installation And Operation Manual

Before installing your FastFrame adapter, you must configure your system to recognize it by installing drivers for
your operating system.
Note
If you already have one or more FastFrame
adapters installed and you are installing
additional adapter(s), you do not need to
perform any of these procedures unless you
are updating a previously installed driver.
The FastFrame NIC Installation CD, referred to in
these instructions, is the Installation CD that shipped
with your adapter. This CD contains the drivers for
OS X and the manuals for the FastFrame products.
It is recommended that the ATTO download page is
checked to get the latest OS X driver. You must
follow the directions below to get the installation
package for the OS X operating system.
This CD does not include drivers for Windows or
Linux operating systems. You must follow the
directions below to get the driver installation
packages for Windows and Linux operating
systems.
Windows
Intel Website (NS14, NS12, NS11, NT12, NT11)
Note
Windows 8, 7, Vista, Server 2012 and
2008 may utilize a new User Account
Control Feature. Because of this there
may be additional confirmations that will
need to be performed to properly install
the driver. These confirmations normally
consist of a dialog where the user has to
give Windows permission to perform an
action. If you do not have the correct
privileges during this, you will be prompted
for an actual user name and password.
You may need to contact your system
administrator if you do not have this
information.
14 ATTO Technology Inc. FastFrame NIC Installation and Operation Manual

3 Install Drivers

1
2
3
4
5
6
Linux
1
2
3
4
5
Download the latest install package from the
Intel support website at
http://www.intel.com/p/en_US/support
transfer it to the system.
Select the Intel X540-T2 Ethernet Controller or
the Intel 82599 10 Gigabit Ehternet Controller.
The download files are the same and they are
appropriate for the FastFrame NIC controllers.
Select the version of Windows on which the
driver will run. Then select either the
ProWin32.exe or the ProWinx64.exe file based
upon the Windows installation of 32-bit or 64-
bit.
Download the file.
Start the installation by double clicking the
downloaded follow.
Follow the instructions to install the NIC driver.
Intel Website (NS14, NS12, NS11, NT12, NT11)
Note
These steps assume a basic knowledge of
Linux terminal commands. You must also
have the correct kernel header files for the
appropriate kernel already installed.
Download the latest install package from the
Intel support website at
http://www.intel.com/p/en_US/support
transfer it to the system.
Select the Intel X540-T2 Ethernet Controller or
the Intel 82599 10 Gigabit Ehternet Controller.
The download files are the same and they are
appropriate for the FastFrame NIC controllers.
Select the latest driver for Network Connections
under Linux.
Download the file.
There is a Read Me (txt) file that provides
instructions on building the Linux driver. Follow
those directions to install the NIC driver under
Linux.
and
and