Hardware Overview; Led Indicators - Axis M1014 User Manual

AXIS M1014 Network Camera

Hardware Overview

SD card slot - A standard or high-capacity microSD card (not included) can be used for local recording with removable storage.
NOTICE
To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System
Options > Storage > SD Card and click Unmount.
Control button - The control button is used for:
• Connecting to an AXIS Video Hosting System service. See
1 second until the Status LED flashes green.
• Connecting to AXIS Internet Dynamic DNS Service. See
about 3 seconds.
• Resetting the product to factory default settings. See
Power connector - Mini DC connector

LED Indicators

LED Color
Network Green
Amber
Unlit
Status Green
Amber
Red
Power Green
Amber
Note
• The Network LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options >
Ports & Devices > LED. See the online help for more information.
• The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options >
Ports & Devices > LED. See the online help for more information.
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .
Indication
Steady for connection to a 100 MBit/s network. Flashes for network activity.
Steady for connection to a 10 MBit/s network. Flashes for network activity.
No network connection.
Steady green for normal operation.
Steady during startup and when restoring settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
page 34
. To connect, press and hold the button for about
page 34
. To connect, press and hold the button for
page 40
.
5