Table of Contents
Advertisement
Get IP address automatically (DHCP)
The camera's default setting is <Use fixed IP address>.
If select <Get IP address automatically>, after the IP Camera restarts, users can search
it through the installer program: DeviceSearch.exe, which can be found in
"DeviceSearch" folder in the supplied CD.
NOTE: Please make the record of the IP Camera's MAC address, which
can be found in the label of the camera, for identification in the future.
Use fixed IP address
To setup static IP address, select <Use fixed IP address> and move the cursor to the IP
address blank and insert the new IP address, ex. 192.168.7.123; then go to the Default
gateway (explained later) blank and change the setting, ex. 192.168.7.254. Click on
<Save> to confirm the new setting.
When using static IP address to login to the IP Camera, users can access it either
through "DeviceSearch" software or input the IP address in the URL bar and click on
<Enter>.
IP address
This is necessary for network identification.
Subnet mask
It is used to determine if the destination is in the same subnet. The default value is
"255.255.255.0".
Default gateway
This is the gateway used to forward frames to destinations in different subnet. Invalid
gateway setting will fail the transmission to destinations in different subnet.
Primary DNS
Primary DNS is the primary domain name server that translates hostnames into IP
addresses.
Secondary DNS
Secondary DNS is a secondary domain name server that backups the primary DNS.
Use PPPoE
30
Advertisement
Table of Contents
