Panasonic WV-CW334S Operating Instructions Manual page 22

t Mount the supplied base cover on the
mounting base.
Important:
• To prevent the cables from being caught
when the base cover is attached, keep the
cables inside the cable guide.
y Use the bit for tamperproof screw (acces-
sory) to tighten the fixing screws provided
on both sides of the base cover.
(Recommended tightening torque:
0.78 N·m {0.58 lbf·ft})
x
Remove the dome cover from the
main body by loosening the three
fixing screws.
Loosen the three fixing screws by using the
provided bit for tamperproof screw.
Important:
• Do not hold the inner dome when carrying
the camera. Otherwise, the camera part
may fall and it may damage the camera.
Note:
• Perform the same procedure when replac-
ing with the optional dome cover WV-
CW4S.
22
Base cover
Base cover fixing screw