Table of Contents
Advertisement
DHCP - Get IP address automatically. Select this option to obtain an available
dynamic IP address assigned by a DHCP server each time the camera is connected
to the LAN.
Static IP - Select this option to manually assign a static IP address to the Network
Camera. Enter the static IP address, Subnet mask, Default Gateway, Primary and
Secondary DNS provided by your ISP.
PPPoE - (Point-to-point over Ethernet): Choose this connection type if you are
connected to the Internet via a DSL Line. Note that to utilize this feature, it requires an
account provided by your ISP. Enter the user name and password provided by your
ISP.
Click Apply or Reset to take effect.
UPnP
Only UPnP discovery supported. Enable this function to allow the user to search for
devices of interest on the network. Enter the UPnP name as you wish to show on the
intranet.
Click Apply or Reset to take effect.
36
Advertisement
Table of Contents
