Events - Axis Q1604 User Manual

AXIS Q1604 Network Camera

Events

Events
The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is
detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
Applications — use installed applications to trigger the rule, see
•
• Detectors
Audio Detection — trigger the rule when audio is detected, see
-
- Motion Detection — trigger the rule when motion is detected, see
Tampering — trigger the rule when tampering is detected, see
-
Hardware
•
- Network — trigger the rule if network connection is lost or restored. This can for example be used to start
recording to the SD card.
• Input Signal
Digital Input Port — trigger the rule when an I/O port receives a signal from a connected device, see
-
Ports, on page 41
Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see
-
Live View page, on page 11
and configuration.
• Storage
Available — trigger the rule when the storage device is unmounted or removed. This can for example be
-
used to send maintenance notifications.
Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be
-
overwritten to prevent the storage device from becoming full.
Locked — trigger the rule if the storage device is locked (write protected).
-
System
•
- System Initializing — trigger the rule when the product is being started. This can for example be used to send a
notification when the product restarts.
• Time
Recurrence — trigger the rule periodically, see
-
upload an image every 5 minutes.
Use Schedule — trigger the rule according to the selected schedule, see
-
Available actions include:
Day/Night Vision Mode — set day mode (IR cut filter on) or night mode (IR cut filter off).
•
Output Port — activate an I/O port to control an external device.
•
• Play Audio Clip — see
Record Video — record video to a selected storage.
•
• Send Images — send images to a recipient.
.
. This can for example be used to validate actions during product installation
Audio Clips, on page 23 .
Applications, on page 28
Audio detection, on page 27
Motion Detection, on page 26
Camera Tampering, on page 26
Recurrences, on page 31
29
.
.
.
.
Controls on the
. This can for example be used to
Schedules, on page 31
.
I/O