Keurig B60 Owner's Manual page 8

SECTION 1 Set-Up & First Brew
Brewing Your First Cup (Continued)
7. Choose the brew size of coffee, tea or hot cocoa
by pressing the button that indicates your
Small Cup
choice. The Large Mug choice will yield a 9.25 oz.
serving, the Small Mug choice will yield a 7.25 oz.
(5.25 oz.)
serving, and the Small Cup choice will yield
a 5.25 oz. serving.
NOTE: If you do not push the Brew Buttons in
60 seconds, the LCD Control Center will return
to "READY TO BREW" and the Brew Buttons will
Small Mug
be disabled to prevent accidental activation.
Re-activate the Brew Buttons by raising and
(7.25 oz.)
lowering the Handle completely.
The LCD Control Center will now display the
8.
word "BREWING" and the brew size you
selected will be solid blue.
Large Mug
CAUTION: There is extremely hot water in the
K-Cup Holder during the brew process. To avoid
(9.25 oz.)
risk of injury, do not lift the Handle or open the
K-Cup Assembly Housing during the brew process.
There may be a short pause prior to coffee
9.
being dispensed. The entire brew process lasts
for approximately 1 minute and ends with a
burst of air to remove all liquid from the K-Cup.
10.
11.
12.
"READY TO BREW" indication will return to
Stopping the Brew Process
If you need to stop brewing after the process has started, press the Power
Button to turn the Brewer "OFF." The flow of coffee, tea or hot cocoa will stop,
the heating element will shut off, and the blue lights illuminating the brew
buttons and Water Reservoir will disappear.
NOTE: You may get less coffee, tea or hot cocoa in your cup during your next
brew. We recommend that you perform a cleansing brew with water-only after
a terminated brew. Then your NEXT brew will be the volume you have selected.
8
Lift the Handle, remove and dispose of the
used K-Cup.
CAUTION: K-Cup will be hot.
Enjoy your first cup of Keurig Brewed
gourmet coffee, tea or hot cocoa!
Your Brewer may display "NOT READY" as
it heats water for the next brew cycle. The
the LCD Control Center in about 15 seconds.
NOTE: Following the brew, your Brewer will
fill in preparation for the next brew. The pump
will make a vibrating sound. This is normal.
®