Back Panel - Buffalo NFINITI High Power WZR-300HP User Manual

Chapter 1 Product Overview

Back Panel

ROUTER
ON
OFF
AUTO
11
USB
EJECT
USB
LAN
14
16
INTERNET
POWER
13
USB Port
14
LAN Port
15
LAN LED (Green)
On:
Flashing:
10
Router Switch
Switches router mode between enabled, disabled, and auto.
On:
Off:
10
Auto:
12
13
11
1 USB Eject Button
To dismount a USB hard drive, hold down this button until
2
the USB LED flashes (about 3 seconds). The USB drive can
15
then be unplugged safely.
3
12
USB LED (Blue)
4
On:
Off:
17
Note: When this LED is blinking, the connected USB drive
18
Connect the USB drive.
Connect your computer, hub, or other Ethernet devices to these ports.
This switching hub supports 10 Mbps,100 Mbps, and 1000 Mbps
connections.
An Ethernet device is connected.
An Ethernet device is communicating.
Router functionality is enabled (router mode).
Router functionality is disabled (bridge/AP
mode).
This switches between modes automatically
based on whether or not another router is
detected on the Internet port. The default setting
for this switch is Auto.
The USB drive is connected.
No USB drive is connected.
cannot be used. Remove the connected USB drive. If
the LED continues to blink even after the USB drive is
removed, restart the AirStation.
Do not remove the USB drive or turn off the
AirStation while the USB LED is on.
- 8 -