11.1 Overview
In WISP + Universal Repeater (UR) mode, the NBG4615 v2 has the same function as in WISP
mode. In addition, it can provide WiFi function to the clients on the LAN side.
Note: When the NBG4615 v2 is in WISP or WISP + Universal Repeater mode, you still
need to enter your ISP information in the WAN screen in order to access the
Internet.
In the example below, one NBG4615 v2 is configured as WISP +Universal Repeater (UR) mode (A)
and another is used as an access point (B). The NBG4615 v2 (A) wirelessly connects to the
available access point (B), and can allow the clients (x and y) to access the network through it
using a wireless connection.
Figure 63 WISP + UR Mode
x
11.2 What You Can Do
• Use the Status screen to view read-only information about your NBG4615 v2
page
73).
• Use the LAN screen to set the IP address for your NBG4615 v2
• Use the Wireless LAN > Universal Repeater screen to associate your NBG4615 v2 (acting as
a wireless client) with an existing access point
85).
• Use the Wireless LAN > Site Survey screen to to scan for available access points within
transmission range
NBG4615 v2 User's Guide
WISP + Universal Repeater Mode
A
WISP + UR
y
(Section 9.6 on page 75
C
HAPTER
B
Access
Point
(Section 8.5 on page
(Section 9.6 on page 75
or
Section 10.6 on page
11
(Section 9.5 on
67).
or
Section 10.5 on page
89).
91