4. Install the RAID controller into an available server system x8 or x16 PCI-Express*
slot (see
add-in card, see your server system documentation.
5. Configure and install the SAS/SATA Devices in the target external storage case.
Refer to the documentation of the devices for any pre-installation
configuration requirements.
6. Use SAS cables to connect the RAID controller to the target external storage case.
8
Low-profile
Bracket
Figure 1. Changing the Bracket
Figure
2). To locate an appropriate slot and for instructions on installing an
Figure 2. Installing the Intel
®
RAID Controller RS25NB008
Intel® RAID Controller RS25NB008 Hardware User's Guide
AF004149
AF004150