ATTO Technology ExpressSAS R608 Installation And Operation Manual page 19

5 Insert the ATTO ExpressSAS host adapter into
any open 3.0/2.0/1.2 PCI Express expansion
slot. If you have questions about how to install
an expansion card in your system, consult your
computer's documentation.
16 ATTO Technology Inc. ATTO ExpressSAS Host & RAID Adapter Installation and Operation Manual
6 Close the case on the computer and power it
up.
7 Installed drivers are loaded.
For Windows 2000, XP and Server 2003
• Windows detects your ExpressSAS Adapter
and the Found New Hardware wizard
appears. Proceed through the wizard with
the default settings for each adapter
channel. Insert the ExpressSAS installation
disk when prompted.
• After adapter installation is complete, the
Found New Hardware wizard shows an
ATTO Phantom Device for each channel.
Proceed through the wizard with default
settings to complete the installation.
For Windows 8, 7, Vista and Server 2012, 2008
• Windows detects your adapter and
automatically installs the required drivers.
If drivers do not load, refer to
page 6 and Troubleshooting
8 Turn off power to the computer.
9 Continue to Install storage
Install Drivers on
on page 37.
on page 25.