Toner Cartridge Replacement - Oki MPS711c User Manual

Note:
For illustrative purposes, the MPS711c printer has been
shown. If you have a MPS610c printer, the principle is
the same with any exceptions noted.

Toner Cartridge Replacement

Note:
When the LCD display indicates TONER LOW, or if print
appears faded, first open the top cover and try tapping
the cartridge a few times to evenly distribute the toner
powder. This will enable you to obtain the best "yield"
from your toner cartridge.
To avoid toner wastage and possible toner sensor
errors, do not change the toner cartridge(s) until
"TONER EMPTY" is displayed.
Have a sheet of paper handy so that you have somewhere to place
the used cartridge while you install the new one.
Dispose of the old cartridge responsibly, inside the pack that the
new one came in. Follow any regulations, recommendations, etc.,
which may be in force concerning waste recycling.
If you do spill any toner powder, lightly brush it off. If this is not
enough, use a cool, damp cloth to remove any residue.
Do not use hot water, and never use solvents of any kind. They will
make stains permanent.
If you inhale any toner or get it in your eyes, drink a
little water or bathe your eyes liberally in cold water.
Seek medical attention immediately.
84
– MPS610c/MPS711c User's Guide
CAUTION!
WARNING!
_____