Installing Components In The 5.25" Drive Bays - Supero 7046A-T User Manual

S W
uper orkstation 7046A-3/7046A-T User's Manual

Installing Components in the 5.25" Drive Bays

The 7046A-3/7046A-T has two 5.25" drive bays. Components such as an extra
fl oppy drive or DVD/CD-ROM drives can be installed into these 5.25" drive bays.
Removing the Empty Drive Bay
1. First power down the system.
2. Remove the top/left chassis cover to access the drive components.
3. With the cover off, remove the screws that secure the drive carrier to the
chassis (one side only) then push the entire empty drive carrier out from the
back.
Adding a DVD/CD-ROM Drive
1. Remove the guide plates (one on each side) from the empty drive carrier
and screw them into both sides of the DVD/CD-ROM drive using the holes
provided.
2. Slide the DVD/CD-ROM into the bay and secure it to the chassis with the
drive carrier screws you fi rst removed.
3. Attach the power and data cables to the drive.
4. Replace the top/left chassis cover and restore power to the system.
6-8