Using Your Digital Camera - Vivitar DVR 620 User Manual

Using Your Digital Camera

 Make sure the batteries have been inserted properly into your digital camera.
 If your camera comes with a rechargeable lithium battery, make sure it is fully charged before
the first use.
 Make sure an SD card has been inserted into your camera.
(SD card up to 16GB - SD Card not included)
Powering the camera ON
Press the Power button
to start.
Powering the camera OFF
While the camera is on, you can press the Power button
camera OFF. You will see a "Goodbye" splash screen and then the camera will power off
completely.
Note: When there is insufficient battery power, a "Low Battery" message will appear on the LCD
screen. The camcorder will automatically power off a few moments later
Auto Power Saving
Your digital camera has an Auto Power Off feature that will automatically turn off the camera if it
has not been in use after 3 minutes.
Setting the Language
When using the digital camcorder for the first time after purchasing it, be sure to choose a
language.
1) Turn the camera on.
2) Press and hold the Delete button for 2 seconds.
3) Press the Up/Down button to select the Language option.
4) Press the Shutter button to save your choice.
to turn your camera ON. The camera will be in Video Capture mode
8
again at any point to turn your