Using Your Digital Camera; Changing Camera Mode - Vivitar DVR 32490V2 User Manual

Using Your Digital Camera

 Make sure the batteries have been inserted properly into your digital camera.
 If your camera comes with a rechargeable lithium battery, make sure it is fully
charged before the first use.
 Make sure an SD card has been inserted into your camera.
(SD card up to 8GB - SD Card not included)
Powering the camera ON
Press the Power button
Capture mode to start.
Powering the camera OFF
While the camera is on, you can press the Power button
your camera OFF.
Note: Your digital camera also has an Auto Power Off feature that will automatically
turn off your camera after 1 minute of time that your camera is left idle.

Changing Camera Mode

Your camera has three main modes:
1) Video Capture Mode - Use this mode to capture videos with your camera.
2) Photo Capture Mode - Use this mode to capture photos with your camera.
3) Playback Mode (for photos and videos) - Use this mode to view the photos and
videos you have already taken with your camera.
When the camera is first powered ON, the Video Capture Mode will be active. The icons
that appear on the LCD screen are the best default settings so that you can begin to
capture and enjoy clear quality videos and photos.
to turn your camera ON. The camera will be in Video
8
again at any point to turn