Turning The Power On Or Off - Yamaha POCKETRAK C24 Owner's Manual

2. Turning the power on or off

Turning the power on
Slide the [POWER] switch to the [ON] position
(in the direction of the thick arrow in the figure).
Note:
· If you leave the recorder turned on for a specified period
of time without using it, the recorder will automatically
turn off (the default setting is "15min").
· When you turn the power on for the first time, set the
calendar (see page 28).
· If a large-capacity (such as 16GB) microSD card is
inserted into the recorder, it will take some time for the
recorder to start up.
Turning the power off
Slide the [POWER] switch to the [ON] position (in the
direction of the thick arrow in the figure) and hold it for
at least two (2) seconds.
Preventing accidental operation
(Hold function)
If you set the [POWER] switch to [HOLD], the unit will
display "HOLD ON" and the control buttons will be dis-
abled.
If you set the [POWER] switch to its original position,
the unit will display "HOLD OFF" and the Hold function
will be canceled.
at least
2 sec
POCKETRAK C24 Owner's Manual
Quick Guide
19