Screen Menu; Tart Up - Hitachi iPJ-AW250N User's Manual And Operating Manual

SCREEN menu

From the SCREEN menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
LANGUAGE
MENU POSITION
BLANK
START UP
(continued on next page)
Using the ▲/▼/◄/► buttons switches the OSD (On Screen
Display) language.
ENGLISH FRANÇAIS
(shown in the LANGUAGE dialog)
Press the ENTER or INPUT button to save the language setting.
Using the ▲/▼/◄/► buttons adjusts the menu position.
To quit the operation, press the MENU button on the remote control
or keep no operation for about 10 seconds.
Using the ▲/▼ buttons switches the mode for the blank screen.
The blank screen is a screen for the temporarily blanking feature
28). It is displayed by pressing the BLANK button on the remote
(
control.
MyScreen ORIGINAL
MyScreen : Screen can be registered by the MyScreen item (
ORIGINAL : Screen preset as the standard screen.
BLUE, WHITE, BLACK : Plain screens in each color.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the plain black screen after several minutes.
Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an
unsuitable signal is detected.
MyScreen ORIGINAL
MyScreen : Screen can be registered by the MyScreen item (
ORIGINAL : Screen preset as the standard screen.
OFF : Plain black screen.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the BLANK screen (
minutes. If also the BLANK screen is the MyScreen or ORIGINAL,
the plain black screen is instead used.
• When the ON is selected to the MyScreen PASSWORD item in
the SECURITY menu (
Description
DEUTSCH
BLUE WHITE
OFF
74), the START UP is fixed to MyScreen.
SCREEN menu
ESPAÑOL
BLACK
above) after several
50).
50).
49