Hitachi iPJ-AW250N User Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. IPJ-AW250N
  6. User manual

Hitachi iPJ-AW250N User Manual

Hide thumbs Also See for iPJ-AW250N:
Table of Contents

Advertisement

Quick Links

Download this manual
Projector
iPJ-AW250N
User's Manual (concise)
Thank you for purchasing this projector.
Please read through this manual before using this product, in order to use safely
and utilize well the product.
WARNING ►Before using this product, be sure to read all manuals for this
product. See the "Using the CD manual" (
After reading them, store them in a safe place for future reference.
►Heed all the warnings and cautions in the manuals or on the product.
►Follow all the instructions in the manuals or on the product.
NOTE • In this manual, unless any comments are accompanied, "the
manuals" means all the documents provided with this product, and "the product"
means this projector and all the accessories came with the projector.
Contents
First of all ............................................ 2
Important safety instruction ..............................2
Regulatory notices .............................. 3
Contents of package........................... 4
Arrangement ....................................... 5
Connecting power supply ................... 7
Using the cable cover ......................... 8
Turning on the power .......................... 9
(Type nos. iPJ-AW250N, iPJ-AW250NM)
19) to read the manuals in the CD.
Operation .......................................... 10
Turning off the power ........................ 12
Replacing the lamp ........................... 13
3
Using the CD manual ....................... 19
1

Advertisement

Table of Contents
loading

Related Manuals for Hitachi iPJ-AW250N

Summary of Contents for Hitachi iPJ-AW250N

  • Page 1: Table Of Contents

    Projector iPJ-AW250N (Type nos. iPJ-AW250N, iPJ-AW250NM) User's Manual (concise) Thank you for purchasing this projector. Please read through this manual before using this product, in order to use safely and utilize well the product. WARNING ►Before using this product, be sure to read all manuals for this 19) to read the manuals in the CD.

  • Page 2: First Of All

    First of all Entries and graphical symbols explanation The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Please know their meanings beforehand, and heed them. WARNING This entry warns of a risk of serious personal injury or even death. CAUTION This entry warns of a risk of personal injury or physical damage.

  • Page 3: Regulatory Notices

    Regulatory notices About Electro-Magnetic Interference This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts.

  • Page 4: About Waste Electrical And Electronic Equipment

    (11) Wall mount unit and User's manual * (12) Sensor cover (12) * iPJ-AW250N does not bundle them. WARNING ►Do not attempt to install the projector yourself. Have your dealer or service center handle all installation work. Note that manufacturer will accept no liability whatsoever for accidents or injuries resulting from an incorrect installation or improper use.

  • Page 5: Arrangement

    Arrangement Refer to table T-1 and figures F-1 and F-2 at the end of this manual to determine the screen size and projection distance. The values shown in the table are calculated for a full size screen: 1280 x 800 Screen size (diagonal) b1 , b2 Projection distance (±8%)

  • Page 6: Connecting With Your Devices

    Connecting with your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Refer to figures F-3 to F-6 at the back of this manual.

  • Page 7: Connecting Power Supply

    Connecting with your devices (continued) NOTE • If a loud feedback noise is produced from the speaker, move the microphone away from the speaker. • This projector doesn't support plug-in power for the microphone. • The COMPUTER IN1/2 port can support a component signal also. The specific adapter or the specific cable is required for a component video input to the projector.

  • Page 8: Using The Cable Cover

    Using the cable cover Utilize the cable cover as the guard and blind for the connecting parts. Connect the signal cables and the power cord to the projector first. Combine parts as shown in figure, and assemble the cable cover. Insert the three knobs on the cable cover into the three holes on the projector as shown in the figure.

  • Page 9: Turning On The Power

    Turning on the power STANDBY/ON button POWER indicator Make sure that the power cord is firmly and correctly connected to the projector and the outlet. Make sure that the POWER indicator is steady orange. Confirm that there is nothing that the MY SOURCE/ VIDEO COMPUTER...

  • Page 10: Adjusting The Projector's Elevator

    Adjusting the projector's elevator The projector has Front foot for inclinations and Rear foot for horizontals. Spacers on the each elevator foot are installed at the time of shipment, and projector is in a condition to be able to just project. If necessary, detach the spacer, and the elevator feet can be manually twisted to make more precise adjustments.
  • Page 11 Focusing ASPECT button Use the FOCUS + and FOCUS – buttons on the projector or remote control to adjust the MY SOURCE/ VIDEO COMPUTER DOC.CAMERA VOLUME+/- button ASPECT AUTO SEARCH BLANK screen focus. PAGE VOLUME MAGNIFY FREEZE DOWN Selecting an aspect ratio KEYSTONE button KEYSTONE MY BUTTON...

  • Page 12: Turning Off The Power

    Turning off the power STANDBY/ON button Press the STANDBY/ON button on the POWER indicator projector or the remote control. The message “Power off?” will appear on the screen for about 5 seconds. Confirm that there is nothing that the lens door hits while closing. Press the STANDBY/ON button again while the MY SOURCE/ VIDEO...

  • Page 13: Replacing The Lamp

    Replacing the lamp A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended.
  • Page 14 Replacing the lamp (continued) HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.

  • Page 15: Cleaning And Replacing The Air Filter

    Cleaning and replacing the air filter The air filter has two kinds of filters inside. Please check and clean the air filter periodically. When the indicators or a message prompts you to clean the air filter, comply with it as soon as possible.

  • Page 16: Preparing For The Remote Control

    Align and insert the two AA batteries HITACHI MAXELL, Part No. LR6 or R6P according to their plus and minus terminals as indicated in the remote control. Replace the battery cover in the direction of the arrow and snap it back into place.

  • Page 17: Replacing The Internal Clock Battery

    This projector has internal clock that uses a battery. When the clock of the network function does not work correctly, please try solution by replacement of the battery: HITACHI MAXELL, part number CR2032 or CR2032H. Turn the projector off, and unplug the Battery Cover power cord.

  • Page 18: Caring For The Mirror And Lens

    Caring for the mirror and lens If the projection mirror or lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the mirror and lens, being cautious of handling. Turn the projector off and unplug the power cord from the power outlet.

  • Page 19: Using The Cd Manual

    Using the CD manual The other manuals for this product are written into the included CD-ROM titled “User’s Manual (detailed)”. Before using the CD-ROM, please read the following to ensure the proper use. System requirements The system for using the CD-ROM requires the following. ®...

  • Page 20: Specifications

    Mounting accessary: HAS-AW100 (Bracket for ceiling mount) HAS-203L (Fixing adaptor for low ceilings) HAS-P100 (Fixing adaptor for high ceilings) Optional parts HAS-K250 (Wall mount unit : only for iPJ-AW250N) Interactive pen: I-PEN Laser remote control: RC-R008 * For more information, please consult your dealer.

  • Page 21: Troubleshooting - Warranty And After-Service

    Blu-ray Disc Association. ® • StarBoard is a registered trademark of Hitachi Solutions, Ltd. in Japan and other countries. • © 2011 Luidia, Inc. All rights reserved. eBeam, the eBeam logo and eBeam Enabled are trademarks or registered trademarks of Luidia, Inc.

This manual is also suitable for:

Ipj-aw250nm

Table of Contents