Connecting A Video Equipment - Sony VPL-SX535 Operating Instructions Manual

Notes
• Use HDMI-compatible equipment and cable(s) that have an HDMI logo on them.
• The HDMI connector of this projector is not compatible with DSD (Direct Stream Digital) Signal
or CEC (Consumer Electronics Control) Signal.
• It is recommended that you set the resolution of your computer to 1280 × 800 pixels (VPL-SW535)
or 1024 × 768 pixels (VPL-SX535) for the external monitor.

Connecting a Video equipment

Connections with a VHS video deck, DVD player, or BD player are explained for each input
signal.
S VIDEO IN
For connecting video equipment with an S-video output connector.
Video equipment
VIDEO IN
For connecting video equipment with a video output connector.
Video equipment
8
Connecting the Projector
S video cable
(not supplied)
S video output
connector
Audio output
connector
Audio cable (Phono plug × 2) (not supplied)
Video cable (not supplied)
Video output
connector
Audio output
connector
Audio cable (Phono plug × 2) (not supplied)