The Installation Menu
The Installation menu is used for installing the projector.
Items
Image Flip
Installation Attitude Right Side Up/Upside Down: Change the cooling setting to suit to the
High Altitude
*1
Mode
Screen Fitting
Notes
*1: When "High Altitude Mode" is set to "On," the speed of the fan increases, and the fan noise
becomes slightly louder.
*2: Since the Keystone adjustment is an electronic correction, the image may be deteriorated.
*3: Depending on the position adjusted with the lens shift feature, the aspect ratio of the image may
change from the original or projected image may be distorted with Keystone adjustment.
*4: Since the Digital shrink is an electronic correction, the image may be deteriorated.
24
The Installation Menu
Item descriptions
HV/H/V/Off: Flips the projected image horizontally or vertically
according to the installation method.
installation attitude. Continuing to use the wrong setting may affect
component reliability.
On/Off: Set to "On" when using the projector at an altitude of 1,500 m or
higher. Continuing to use the wrong setting may affect component
reliability.
*2*3
V keystone
: The higher the value, the narrower the top of the projected
image. The lower the value, the narrower the bottom.
*4
Digital Shrink
: Reduces the entire image. "0" is standard size image.
Use this function if the projected image exceeds the screen size.